Wood Grain Broken Bridge Aluminum Profiles For Three Track Sliding
1.The surface of aluminum profile is beautiful and
corrosion-resistant after oxidation.
2.Anodized aluminum profiles are dirty and easy to clean. When
assembled, different shapes of profiles are adopted according to
different load-bearing, and supporting aluminum profiles are used.
3.No need for welding, more environmental protection, and
installation, demolition, carrying, moving very convenient.
4.Aluminum products have good rigidity, high strength, light
weight, corrosion resistance, good decoration, long service life
and so on.
Attention: in the process of installing and storing aluminum
materials, we should pay attention to not putting aluminum material
in disorder, and can not put aluminum in the place where there is
water, because the aluminum material is placed in the place where
there is water for a long time, and the oxidation phenomenon will
appear, and there will be black spots.
|Description||Wood grain broken bridge aluminum profile|
|Material Thickness(t)||1.0/1.1/1.2/1.4 mm|
|Materiral||aluminum alloy 6063,6063A,6060,6061|
|Color||Silver White ,Bronze , Champagne, Black, (RAL series)etc.|
|Surface Treatment||anodized, powder coated, electrophoresis, wood grain, polished and
|Shape||Square, Round, Flat, Oval, and according to customer's drawing.|
|Length||Normal length=6m or in customer's order|
|Usage||Building, Production Line, Decoration, Industrial, Transportation,
Door and window, etc.|
1. Pearl cotton foam for each profile;
2. Wrap with shrink film exterior;
3. Packed according to customer request.
Providing colorful products with various mechanical
performances to adapt all kinds of architectural styles
Introduction of Wood Grain:
The wood grain transfer profile is based on the powder spraying or
electrophoretic coating, according to the principle of high
temperature sublimation thermal penetration, by heating and
pressing, the wood pattern on the transfer paper or the transfer
film is quickly transferred and penetrated to the profiles which
have been sprayed or electrophoretic. The production of wood grain
profile clear texture, strong sense of three-dimensional, better
reflect the natural feeling of wood grain, is an ideal energy
saving and environmental protection material instead of traditional
Wood grain has strong adhesion to aluminum, which is non-toxic,
odorless and easy to clean. Product lines clear and realistic,
strong sense of three-dimensional, decorative effect is good, there
is a return to nature, return to nature's visual effect. The
coating on the surface of the aluminum profile can not volatilize
or oxidize in the air without any pollution to the environment. The
dirt deposited on the spray surface can be restored to its original
luster and appearance after being washed.
Advantages of Wood Grain:
(1) select the substrate that has been sprayed or electrophoretic.
(2) use wood grain heat transfer paper to wrap the transferred
substrate, and use the heat resistant adhesive tape to fix the
interface of the paper, so as to prevent grained heat transfer
paper from loosening. (Note: the front side of wood pattern heat
transfer paper should be pasted with the transferred substrate.
(3)then set up the high temperature resistant and well sealed
plastic plastic bag on the base material which has been wrapped by
the wood grain heat transfer paper, and then vacuum from the two
ends of the plastic bag until the plastic bag is fully and
effectively cling to the base material. The negative pressure of
vacuum should be adjusted according to the characteristics of the
transferred substrate and the negative pressure that the plastic
bag can bear, usually between 0.3 and 0.8Mpa. (Note: the purpose of
using plastic bags is to force the wood grain hot transfer paper to
be fully and effectively pressed on the base material by the
(4) the base material that has been wrapped is sent to the oven to
bake. The height of the baking temperature and the length of the
time should be adjusted according to the characteristics of the
substrate, the depth of the transfer texture and the specific
performance of the oven. The temperature of the transfer is usually
160~180 centigrade and the time is 5~8 minutes.
(5) remove the transferred substrate from the oven and pull out the
plastic bag from one end of the transferred substrate (Note: this
plastic bag can be reused), tearing down the hot transfer paper,
and cleaning the surface.